Akvastroiservis
CUSTOMER NEW PARTNER LICENSEE
 
 
 


HOME
LAST EVENTS
ABOUT US
OUR MISSION
WHAT MAKES US DIFFERENT
PRODUCTS and DEVELOPMENTS
Products and Developments
Deironing
Aerator, degasifier
Intelligent floating filters
Washing-free filter
Water disinfection
Sorbent Ferosid
Electrochemical systems
Ejection water cooler
Self-flowing oil separators
Polymer Floating Filtering Media
Membrane filter
Electronics-free apparatus
AKV Design
Floating Bioreactors
BIODNF
POLIFIL
Parameters of water
WORKING WITH US
CONTACT US


Self-flowing oil separators


Areas of application:

Carwash, vehicle depot, garage, shipyard, oil storehouse, etc.

Designed for:

Purification of water from oil, oil products and grease (with density of 750 - 950 kg/m3). The initial concentration of oil products can be up to 1000 mg/l, and of total suspended solids up to 3,000 mg/l).

Operation:

Feed water gravity flows into the horizontal settler/crimped insert, where suspended solids precipitate and oil products float to the surface of water. Then, water arrives to a "sponge" partition, where remaining particle of oil products undergo further coalescence. Final purification of water is achieved on the sorption filter "FIBROIL".

Maintenance:

  • Once a week, floated oil products are drained off into an appropriate container (a petrol can, for example) and collected for recycling;
  • Once a year, the settler is manually cleaned of accumulated residue;
  • Periodically, the sorption material "FIBROIL" is replaced. The sorption capacity of "FIBROIL" is 8 grams of oil products per one gram of "FIBROIL";
  • Periodically, the "sponge" partition is removed and cleaned.

Fabrication materials:

Flat polypropylene sheet MOSTEN 52 492 and shaped polypropylene sheet MOSTEN 52 492 for rigidity.

Quality of purified water:

  • Oil products (before "FIBROIL" filter) - 10 mg/l
  • Oil products (after "FIBROIL" filter) - 0.2 or 0.05 mg/l
  • Suspended solids - up to 1.5 mg/l

Choosing Oil Separator, you will benefit from the following:

  • Chemical-free process
  • No energy consumption
  • Gravity flow of water
  • Low maintenancel
  • Simple and fast installation and commissioning just following the instruction manual - presence of our specialists is not required
  • The system can operate out of premises in the temperature range of 5 to 60 C
  • Timely re-supply of "FIBROIL" material from us.

 

 
Copyright 2001-2017 Acvastroyservis.
Development by Freesia 2006